Sennheiser EK IEM G4, Инструкция по эксплуатации

Страница: 20 / 113

Installing the SR IEM G4
19
Installing the SR IEM G4
These sections contain detailed information about installing and starting
up the SR IEM G4.
You can find information about operating the SR IEM G4 under “Using the
SR IEM G4”.
Connectors on the rear of the device
SR IEM G4 rear side product overview
►
1
Strain relief for the cable of the power supply unit
• See “Connecting/disconnecting the SR IEM G4 with/from the power
supply”
2
DC IN socket
• For connecting the power supply unit
• See “Connecting/disconnecting the SR IEM G4 with/from the power
supply”
3
LAN connection socket ( ETHERNET RJ 45 )
• See “Creating a data network”
4
6.3 mm jack socket LOOP OUT BAL L(I)
• Audio output, left
• See “Daisy chaining audio signals”
5
6.3 mm jack socket LOOP OUT BAL R(II)
• Audio output, right
• See “Daisy chaining audio signals”
6
XLR-3/6.3 mm jack combo socket BAL AF IN L(I)
• Audio input, left
• See “Connecting audio signals”
7
XLR-3/6.3 mm jack combo socket BAL AF IN R(II)
• Audio input, right
• See “Connecting audio signals”
8
RF OUT BNC socket
• Antenna output with remote power supply input
• See “Connecting antennas”