12
|
EK 6042
Putting the EK 6042 into operating
Putting the EK 6042 into operating
Mounting the EK 6042 into a video camera
You can mount the EK 6042 into the receiver slot of a video camera.
In order to mount the EK 6042 into video cameras with
UniSlot/SuperSlot™ interface (e.g. Panasonic, Ikegami, ARRI, Sound
Devices), you require the GA 6042-25 mounting kit. In order to mount the
receiver into Sony video cameras, you require the GA 6042-15 mounting
kit. Each mounting kit consists of an adapter plate
4
and a D-sub
adapter
5
.
왘
Secure the adapter plate onto the receiver
slot
7
of your video camera using the four
supplied screws
3
.
왘
Carefully connect the D-sub adapter to the
multi-pin interface of the EK 6042
2
.
Secure the D-sub adapter to the EK 6042
using the two supplied screws
6
.
왘
Slide the EK 6042 with the mounted D-sub
adapter through the adapter plate
into the
receiver slot.
왘
Secure the EK 6042 to the video camera
using the two supplied screws
1
.
The EK 6042 is connected via its multi-pin
interface to the video camera and is
powered via the video camera’s recharge-
able battery.
If you use the EK 6042 in the receiver slot of a video camera with
UniSlot/SuperSlot™ interface (e.g. Panasonic, Ikegami, ARRI), the
audio signals of both receiving channels are transmitted to the
camera via the receiver’s multi-pin interface.
If you use the EK 6042 in the receiver slot of a Sony video camera,
it might be that the camera only accepts the audio signal of
receiving channel CH1. If you also want to transmit receiving
channel CH2 to the video camera:
왘
Use the Y-adapter cable to connect the 5-pin mini XLR socket
(Top) AUX 1/2
to a second audio input of your Sony video
camera.
1
2
4
5
6
7
3