Sennheiser EK 3241, Инструкция по эксплуатации

Страница: 19 / 28

18
Selecting the standard display – dISP
Via the “ dISP ” menu, you can select one of the following
standard displays:
The selected standard display is shown
y
after switch-on,
y
after the parameters have been displayed for 15 seconds
in display mode.
Note:
In order that the transmitter battery status can be
displayed on the “
BAt.tr ” standard display, this
functionality must be supported by the transmitter
used (see “Suitable transmitters” on page 4).
Loading the factory-preset default settings
–
rESEt
Via the “ rESEt ” menu, you can load the factory-preset
default settings. After the reset, the standard display is
shown on the LC display panel.
Caution:
The frequencies in the channel bank “U” (variable bank)
are also reset.
Activating/deactivating the lock mode – Loc
Via the “ Loc ” menu, you can activate ( Loc.on ) or deactivate
( Loc.oFF ) the lock mode of the receiver.
Exiting the selection mode and returning to
the standard display –
ESc
Via the “ ESc ” menu, you can exit the selection mode and
return to the standard display.
When in the selection or setting mode, briefly pressing the
ON / OFF button will cancel your entry (ESC function) and
return you to the standard display without saving any
changes.
Channel Frequency Battery status
“ CHAn ” “ FrEq ” “ BAt.tr ”
Headphone volume: 20
Squelch threshold: 10
Standard display: frequency
Current receiving channel: F.01
Automatic switch-on/off
via camcorder:
activated
Lock mode: deactivated