Putting the receiver into operation
10 |
Tourguide 1039
Putting the receiver into operation
Inserting the batteries or the accupack
For powering the diversity receiver, you can either use two 1.5 V AA size batteries
or the rechargeable Sennheiser BA 2015 accupack.
For daily use, we recommend using the supplied BA 2015 accupack. The accupack
can be charged in the L 2015 charger without having to be removed from the
device.
왘
Open the battery compartment by pushing the two catches
in the direction
of the arrows and open the cover
왘
Insert the BA 2015 accupack or the two batteries as shown above. Please
observe correct polarity when inserting the accupack/batteries.
왘
Close the battery compartment by pressing on the center of the cover
. The
battery compartment cover
locks into place with an audible click.
Charging the accupack
To charge the BA 2015 accupack installed in the receiver:
왘
Insert the diversity receiver into the L 2015 charger.
The receiver switches off and the accupack is being charged.
For more information on charging the BA 2015 accupack, refer to the instruction
manual for the L 2015 charger.
Connecting headphones
왘
Connect headphones with an impedance of at least 8
Ω
to the 3.5 mm jack
socket
.
Never switch on the receiver during charging because otherwise the accu-
pack will not be charged correctly.
The L 2015 charger can only charge the BA 2015 accupack. Standard bat-
teries (primary cells) installed in the receiver or individual rechargeable
battery cells cannot be charged.
Ch 4
English
