Making calls using the headset
D 10 series
| 28
Adding a GUEST headset to a conference call
왘
Press and hold the Audio button while placing the guest headset into
the base station of the master headset.
The Headset LED alternately flashes blue/red until a link to the base
station is established. The Headset LED flashes blue 3 times.
왘
Take the guest headset out of the base station. You hear a beep in the
master headset.
왘
To add the guest headset to the conference call, press the Link button
on the master headset within 15 seconds.
왘
Repeat this procedure to add additional guest headsets to the
conference call.
왘
Call the other party.
The Link LED
on the base station flashes blue.
Dropping a GUEST headset from the conference call
왘
Press the Link button on the guest headset. The guest headset is
dropped from the conference call.
Ending a conference call
왘
Place the master headset into the magnetic holder of the base station
to end the conference call and to drop the guest headsets from the
conference call.
3x
Press & hold
the mute button...
Accept the
Guest headset.
... & insert the headset
into the charging
cradle.
MASTER
GUEST 1-3
or
3x
on
Easy paring
“easy pairing”
To subsequently use the guest headset with other base stations,
place the guest headsets into the other base stations. The
Headset LED alternately flashes blue/red until a link is established.
