Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
ClipMic
digital
Quick Start Guide
3B
Adjusting Input Level with
Apogee Maestro App
X
Open Apogee Maestro app and choose
Sennheiser
ClipMic digital
from the main menu.
1
Tap the
Input Monitoring
button to hear your micro-
phone input.
2
Turn the
Gain Adjustment
knob to increase or decrea-
se the microphone input to the desired level. Small
adjustments can also be made by pressing either the
“–“or “+“ buttons
3
.
Tips for Setting Input Level
The best way to do this is to monitor the loudest
sound you will be recording and adjust the input
gain so the input metering remains green, yellow or
orange and not red. If the microphone input meter
becomes red when recording, the input is too high
and the recording will be distorted.
4
Select an
Input Processing
preset. The presets use
onboard DSP processing to shape the sound with EQ,
compression and limiting to achieve the most natural
or unique result. Select
No Processing
or leave as is to
bypass this feature.
4
Recording
Note:
It is recommended that you set your iOS device to
airplane mode to prevent any incoming calls from
disrupting your recordings.
X
Open Apogee MetaRecorder or any other Core Audio
compatible recording App.
ClipMic digital should be automatically detected and
selected as the input device.
X
If you haven’t already done so, connect headphones to
the built-in output on your iOS device and enable input
monitoring in the recording App.
X
Tap the
Record
button
1
in the App to begin.
For more info on Apogee MetaRecorder
and other compatible apps,
visit www.apogeedigital.com/apps
Attachment of the Microphone
25 cm (10 inches)
3C
Apple Watch Remote Control
MetaRecorder offers an Apple Watch App to remotely
operate these controls.
1
Tap to operate
transport controls.
2
Force tap to toggle
favorite status.
3
Tap to add
a marker.
4
Tap to reset
max. peak display.
5
Tap “+” or “–“
to adjust input
gain.
Printed in Germany, Publ. 04/15, 560096/A03
QG_ClipMic digital.indd 1
29.05.2015 10:48:26