![background image](http://html1.mh-extra.com/html/sennheiser/adn-cu1/adn-cu1_instruction-manual_1239911015.webp)
ADN CU1
| 13
Setting up the conference system
Setting up the conference system
Regardless of the number of conference units and the room size, we recommend
the following procedure for setting up the conference system:
왘
Decide if you require wired or mobile wireless conference units. You can also
combine wired and wireless conference units.
왘
Plan the number of conference units required for your conference system. A
total of 400 conference units (of which up to 150 can be wireless) can be used
in a conference system (the maximum number of ADN C1 or ADN-W C1 chair-
person units is limited to 10). Always take the largest possible number of par-
ticipants as a starting point.
If you are using wired conference units:
왘
Plan if simple cabling is sufficient or if you require a redundant ring topology
(see page 7).
왘
If necessary, calculate the number of ADN PS power supplies required (a maxi-
mum of 15 ADN PS power supplies can be used in a conference system).
왘
If necessary, calculate the maximum length of the cabling in order to ensure
that all conference units connected are supplied with sufficient voltage (see
page 7).
왘
Place the ADN CU1 central unit and, if necessary, the ADN PS power supplies
e.g. in the electrical equipment room or in the conference room.
왘
Place the conference units at the corresponding seats.
왘
Put out a sufficient number of SDC CBL RJ45 system cables in the required
lengths.
If you are using wireless conference units:
왘
Place the ADN CU1 central unit e.g. in the electrical equipment room or in the
conference room. If possible, place the ADN-W AM antenna module directly in
the conference room. The transmission range of the antenna module is approx.
30 m.
왘
Place the operational wireless conference units at the corresponding seats.
CAUTION
Product damage due to an unsuitable power supply!
If you connect standard network devices with RJ45 plugs (e.g. switches or network
cards) to the connection sockets
PORT I
,
PORT II
,
DATA PS
and
/
, the net-
work devices can be damaged due to an unsuitable power supply.
왘
Only connect ADN C1 and ADN D1 conference units, ADN PS power supplies and
the ADN-W AM antenna module to the connection sockets
PORT I
,
PORT II
,
DATA
PS
and
/
.
When connecting the conference units to an ADN PS power supply, you can
mix different cable topologies (simple cabling or redundant ring topology)
as long as you ensure correct cabling and comply with the specifications.
In some countries/regions (e.g. Canada), the use of wireless components
operating in the 5.15 to 5.25 GHz frequency band (channel 5 to 8) is
restricted to indoor use.
Содержание ADN CU1
Страница 1: ...Instruction manual Control Unit ADN CU1 ...
Страница 2: ......