31
Using the headset system
Pairing is not successful
If pairing is not successful within 60 seconds, the DW Office headset
switches to standby mode.
왘
For information on how to pair the headset to the non-DW Office base
station, refer to the instruction manual of the base station.
Charging an additional headset
If you wish to charge an additional headset (headset
b
) in the base station
while you are using your headset (headset
a
):
왘
Make sure that a wireless link is established between headset
a
and
base station (the LINK LED
on the base station lights up blue).
왘
Place headset
b
into the base station.
Headset
a
can continue to connect to and disconnect from the base
station and its use is not restricted while headset
b
is being charged.
If you leave the DECT range
If you leave the DECT range during a call, the audio quality deteriorates.
When the link breaks down completely, you hear a descending sequence
of beeps in the headset and the LINK LED
on the base station lights up
red.
To resume the call:
왘
Re-enter the DECT range of the headset system within 60 seconds.
As soon as the headset re-establishes the wireless link to the base
station, you hear a ring tone in the headset.
왘
Press the LINK button
on the headset to resume the call.
If a handset lifter/electronic hook switch is used or if your soft-
phone supports call control, the call will automatically be ended
60 seconds after leaving the DECT range.
