![background image](http://html.mh-extra.com/html/sennheiser/500-series/500-series_instruction-manual_1240168029.webp)
Installing the ASA 214
53
6
4 BNC sockets
A1
to
A4
• RF outputs of diversity branch A for connection to the receiver
• Every one of these RF outputs can also provide voltage to a receiver.
• See “Connecting receivers to the ASA 214”
7
Strain relief for the cable of the power supply unit
• See “Connecting/disconnecting the ASA 214 to/from the power sup-
Connecting/disconnecting the ASA 214 to/from the
power supply system
To supply power to the ASA 214, the connected receivers and any antenna
amplifiers used, you will need the NT 1-1 power supply unit.
Only use the supplied NT 1-1 power supply unit. It is designed for your an-
tenna splitter and ensures safe operation.
To connect the ASA 214 antenna splitter to the power supply system:
▷
Plug the hollow jack plug of the power supply unit into the
DC IN
socket
of the antenna splitter.
▷
Pass the cable of the power supply unit through the cable grip.
▷
Slide the supplied country adapter onto the power supply unit.
▷
Plug the power supply unit into the wall socket.
To completely disconnect the ASA 214 antenna splitter from the power
supply system:
▷
Unplug the power supply unit from the wall socket.
▷
Unplug the hollow jack plug of the power supply unit from the
DC IN
socket of the antenna splitter.