Prepared by KM 11/2015
12 Patent pending
14407 Coil Plus Dr, Unit A | Plainfield, IL 60544
www.sennco.com | [email protected]
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
1.
Plug the barrel plug end of the AC power cable into the AC power port on the main alarm.
2.
Plug the other end of the cable into an outlet that has AC power available.
3.
Place the main alarm in a secure location
within 50 feet
of the
bubble makers
with the antenna positioned vertically 90°. It should be at least
2 feet
away from the nearest
sensor head
.
B. Main alarm
C. Sniffer
1.
Plug the barrel plug end of the AC power cable into the AC power port on the sniffer.
2.
Plug the other end of the cable into an outlet that has AC power available.
3.
Place the sniffer in a secure location within 50 feet of the system with the antenna positioned vertically 90°.
D. Gateway
1.
Screw the taller antenna into the left position labeled WLAN and the shorter antenna into the right position labeled 3G/GPRS. Position both
antennas vertically.
2.
Plug the USBA cable from the sniffer into the USB port on the gateway.
3.
Connect the two parts of the AC power cable together. Plug the barrel plug end of the AC power cable into the AC power port on the gate-
way.
4.
Plug the other end of the cable into an outlet that has AC power available.
