background image

MGT Docking Station version II

Limited Warranty

SENKO warrants this product to be free of defects in workmanship and materials-under normal use 

and service for two years from the date of purchase from the manufacturer or from the product’s 

authorized reseller. 

The manufacturer is not liable (under this warranty) if its testing and examination disclose that the 

alleged defect in the product does not exist or was caused by the purchaser’s (or any third party’s) 

misuse, neglect, or improper installation, testing, or calibrations. Any unauthorized attempt to repair 

or modify the product, or any other cause of damage beyond the range of the intended use, 

including damage by fire, lightening, water damage or other hazard, voids liability of the 

manufacturer. 

In the event that a product should fail to perform up to manufacturer specifications during the 

applicable warranty period, please contact the product’s authorized reseller or SENKO service 

center at 82-31-492-0445 to repair/return information. 

73, Oesammi-ro 15 beon-gil, Osan-si, Gyeonggi-do, 18111, South Korea

Tel : 82-31-492-0445         

Fax : 82-31-492-0446

Email : [email protected]         Web : www.senko.co.kr

11

Содержание MGT












Отзывы: