Document Number
: SGD-0220-001-01
3 |
P a g e
Disclaimer
The information noted within this document is purely for informational purposes only.
Please note that SENKO Advanced Components, Inc. does not warrant or assume any
legal liability or responsibility for the accuracy, completeness or usefulness of any
information or processes disclosed. Specifications are subject to change without
notice.
The following information is strictly confidential. Reproduction or disclosure to any third
party is not permitted without the express written consent of SENKO Advanced
Components, Inc. The SENKO Group logo as well as the name "SENKO" are
Registered Trade Marks of SENKO Advanced Components, Inc. All other Trade Marks
referred to are the property of the respective rights holders.
For further information or general comments, please contact one of our sales offices.
Range of Limitations
The Product Information found herein pertain to the Fiber Meter, Part Number
AFT-G-
FM-3DG-BT-SM-MM
.
Description
SENKO Bluetooth Power Meter is mainly used for checking the signal output power of
the optical communication equipment in the fiber optic networks. The device measures
the average power of a continuous light beam emitted from the source. Operating
wavelengths 850nm/1310nm/1550nm.
The Fiber Meter consists of a solid state InGaAs photo diode, signal power
measurement circuitry, and a 3 Digits LED display. The DUT connects between the
transmission port and the universal interface on the Fiber Meter. The product displays
accurate loss of transmission power (in dBm/dB).
The universal connector works with most common fiber interfaces such as ST / SC /
FC and it is suitable to test both Single mode and Multimode cables. With an optical
2.5 mm to 1.25 mm adapter.
Dimensions and Materials
All materials comply with RoHS Restricted Hazardous Substances as detailed in
‘
DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLAMENT AND OF THE
COUNCIL
of 27 January 2003 on the Restriction of the use of Certain Hazardous
Substances in Electrical and Electronic Equipment (RoHS
)
’
