3
WWW.SENIXTOOLS.COM
ELECTRICAL INFORMATION
CHARGER
Protect the battery charger and its cord from damage.
Keep the charger and its cord away from heat, oil and
sharp edges. Electrical plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter plugs
with grounded appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
Keep the battery charger, battery pack(s) and the cordless
tool out of the reach of children. Do not use the supplied
battery charger to charge other cordless tools. During
periods of heavy use, the battery pack will become warm.
Allow the battery pack to cool to room temperature before
inserting it into the charger to recharge.
Do not overcharge batteries. Do not exceed the maximum
charging times. These charging times only apply to
discharged batteries. Frequent insertion of a charged or
partially charged battery pack will result in overcharging
and cell damage. Do not leave battery in the charger for
days on end. Never use or charge a battery if you suspect
that it has been more than 12 months since the last time
they were charged. There is a high probability that the
battery pack has already suffered dangerous damage
(exhaustive discharge).
Do not use battery that have been exposed to heat during
the charging process, as the battery cells may have
suffered dangerous damage. Do not use battery that have
suffered curvature or deformation during the charging
process or those that exhibit other atypical symptoms
(gassing, hissing, cracking, etc.)
GROUNDING INSTRUCTIONS (For charger)
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN,
grounding provides the path of least resistance for an
electric current and reduces the risk of electric shock. This
tool is equipped with an electric cord that has an equipment
grounding conductor and a grounding plug. The plug
MUST be plugged into a matching outlet that is properly
installed and grounded in accordance with ALL local codes
and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit
the outlet, have the proper outlet installed by a
licensed electrician.
IMPROPER CONNECTION of the equipment grounding
conductor can result in electric shock. The conductor with
the green insulation (with or without yellow stripes) is the
equipment grounding conductor. If repair or replacement of
the electric cord or plug is necessary, DO NOT connect the
equipment grounding conductor to a live terminal.
CHECK with a licensed electrician or service personnel
if you do not completely understand the grounding
instructions or whether the tool is properly grounded.
CAUTION: In all cases, make certain the outlet in
question is properly grounded. If you are
not sure, have a licensed electrician check
the outlet.
WARNING — This tool is for indoor use only. Do not
expose to rain or use in damp locations.
!
!
