3MTS
: Operation Manual
3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX
5
1.5 Warnings
Risk of injury from electric strike!
Before cleaning, the device must be disconnected from the supply voltage by
removing the USB cable from the USB port of the personal computer or tablet.
Do not modify, bend, mechanically stress, pull, heat, or expose the USB cable to
heat or cold sources. Do not squeeze the cable or damage it by sharp edges. The
cable guide on the device must not be loaded by pulling. There must always be a
sufficient cable length from the probe to the personal computer.
If damage is observed, the device must be taken out of operation immediately.
Contact the manufacturer in this case.
Danger by liquids!
To reduce the risk of fire or electric shock, do not expose the unit to rain or
moisture. No liquid must penetrate the housing, nor may the electrical
components come into contact with a liquid. The device must be completely dry
before turning it on again
Danger due to magnetic fields!
The device measures magnetic fields, such as the magnetic field of permanent
magnets. Never stick unsecured magnets together. There is a risk of crushing
and cutting. Do not allow any iron parts (e.g. tools) to lie around.
Do not put the credit cards near the magnets. These could be deleted or
damaged.
Heart pacemakers can be interfered by the magnetic field, so inform your
employees on dangers that might be caused by strong magnets!
