2
Wick Replacement Instructions for Omni Radiant Ker
osene Heaters
Step 12
Insert the pinion on the inside of the wick
control shaft into top portion of the rack
of the wick holder.
Step 11
Replacement wick has a black line. Fold
the new wick and slide it into the holder
up to the line. The black line on the
outside of the wick should match the top
edge of the holder. Then carefully press
the wick against the teeth inside the
holder to obtain a firm grip.
Step 10
Remove the wick from the holder by
folding it inward. Loosen it from the sharp
metal teeth in the inner surface of the
holder and then slide it out.
Step 9
Remove the sleeve from the assembly.
Step 8
Pull out the wick holder assembly.
Step 7
Remove the automatic ignition assembly
by unscrewing 2 screws.