1
2
Test the alignment before you adhere each piece.
3
Once your sensor is successfully connected to the
hub, please adhere it to the door or window with
the 3M double sided tapes included. Ensure the
surface to be clean before adhering your sensor.
Note:
Install the battery first. Then you will have
one minute to successfully pair it. If fail, then follow
the reset instruction on the next page. Besides, your
sensor will flash twice during the installation
process: once you install the battery, and again
when it’s paired successfully.
Open the
Sengled Home App
, go to
Devices
and click “+”, then
choose
Smart LEDs and Accessories
(used
with a hub).
Installation Instructions:
To add your Smart Sensor to a Sengled hub, follow the
instructions below. If you DO NOT have a Sengled
Smart Hub and Sengled Home app previously installed,
please install your hub according to its user guide in the
package before installing the sensor. If you have a
3rd-party hub, such as SmartThings or Amazon Echo
Plus, you can also connect Sengled Smart Sensors to
these hubs according to their instructions in apps.
Note:
Please make sure your mobile device and
Sengled Smart Hub are connected to the same router.
Both 2.4GHz and 5GHz (refer to wireless transmission
frequency, different with the “5G” used in phones. ) are
supported.
2
Congratulations on successfully installing your
Window & Door Sensor!
Follow the in-app instructions for installation.
