17
After checking the outer packing intact and complete, move the PV inverter to the
designated installation position horizontally. Hold the handles on both sides of the 3K/
5K, as shown in Figure 4.1.
Figure 4.1
Moving the inverter
CAUTION
>Do not place the PV inverter with its wiring terminals contacting the floor
because the power ports and signal ports at the bottom of the device are not
designed to support the weight of the inverter.
>When placing the inverter on the floor horizontally, put foam or paper under
to protect its enclosure.
4.3 Identify the PV inverter
4.3.1
Nameplate
After moving the PV inverter from packing box, identify it by reading its nameplate labeled on
the side. The nameplate contains important product information: the model information,
communications/ technical specifications, and compliance
4.3.2 Compliance and Safety Symbols
