MI003781-E.DOCX
ENGLISH 6/8
Power Supply
3
2 1
The power supply must be connected to the
IDC10 bus or to terminals 2 and 3.
The supply voltage must be between 10 and
40V
(any polarity), or between 19 and 28 V
.
The upper limits must not be exceeded in
order to avoid serious damage to the
module.
The power supply source must be protected
from any malfunctions using appropriately-sized
safety fuses.
Micro USB
The module has a microUSB connector, you can connect the Z-MODEM-3G to Z-TWS4
or to Z-PASS1 through it. The adaptor cables, supplied with the module, must be
connected as shown in the figure.
For further information, refer to the Z-TWS4 or Z-PASS1 user manuals.
5
