TECHNICAL SPECIFICATIONS
PRELIMINARY WARNINGS
WARNING:
The full content of this manual must be read before operation.
The module must only
be used by qualified electricians. Specific documentation is available at
www.seneca.it\produtcs\z-mbus
indicates conditions or actions that put the user's safety at risk.
indicates conditions or actions that might damage the instrument or the connected
The word WARNING preceded by the symbol
The word ATTENTION preceded by the symbol
equipment.
The warranty shall become null and void in the event of improper use or tampering with the device or accessories
supplied by the manufacturer as necessary for its correct operation, and if the instructions contained in this manual are not
followed.
The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to
electrostatic discharges. Take appropriate measures during any operation.
ATTENTION: Installing the module next to devices that generate heat is prohibited.
Electrical and electronic waste disposal (applicable in the European Union and other countries with
recycling). The symbol on the product or its packaging shows that the product must be disposed of at a
collection centre authorised to recycle
electrical and electronic waste.
ASSEMBLY STANDARDS
The module has been designed for vertical installation on an IEC EN 60715 omega guide. For optimal
operation and long life, adequate ventilation must be provided. Avoid positioning channels or other objects
that obstruct the ventilation slots. Avoid mounting modules over equipment generating heat. Installation in the
bottom part of the switchboard is recommended.
USE OF THE Z-PC-DINAL ACCESSORY
RS232 PORT
on M7-M8-M9 terminals
micro USB on the front panel
USB PORT
on M10-M12 terminals
Number of slaves:
25 Max.
Speed :
300
–
38k4 Baud
Voltage:
28 Vdc
Maximum length:
3000 m
M-Bus (Meter-Bus) PORT
ATTENTION: Do not turn the module upside down
and
do not force the insertion
of the IDC10
connector into the slot. The module's rear IDC10 connector must be plugged into a free slot on the
Z-PC-DIN bus. The figure shows the IDC10 connector pins the supply the module.
ENGLISH - 3/4
t
Power supply AC-
IDC10
1
Power supply AC+
Z-PC-DINAL
Slot
Power supply
(AC-)
Power supply
(AC+)
P.E.
