Seneca Z-KEY, Руководство пользователя

Страница: 50 / 99

USER MANUAL – Z-KEY
50
PORT #1 WRITING RETRIES
Used to Set the retries to write a Modbus register into Modbus Master mode
PORT #1 MAX WRITE NUM
Used to Set the maximum number of registers that can be written with the Modbus function “Write Multiple
Registers” or “Write Multiple Coil”.
PORT #1 MAX READ NUM
Used to Set the maximum number of registers that can be read with the Modbus function “Read Multiple
Registers” or “Read Multiple Coils”.
PORT #2 BAUDRATE
Used to Set the port baudrate
PORT #2 BITS
Used to Set the number of bits for the serial communication.
PORT #2 PARITY
Used to Set the port parity (None, Odd or even)
PORT #2 STOP BITS
Used to Set the port parity (1 or 2; note that if the parity is set, only 1 bit can be used)
PORT #2 TIMEOUT
Used to Set the timeout on Modbus Master mode before making a new call
PORT #2 MODBUS READING DELAY
Used to Set the delay between two Modbus Master request