Seneca Z-4DI-2AI-2DO, Руководство по установке

Страница: 7 / 8

MI003032-E
ENGLISH 7/8
Disposal of Electrical & Electronic Equipment (Applicable throughout the European Union and other European
countries with separate collections programs). This symbol, found on your producr or on its packaging, indicates that
this product should not be treated as household waste when you wish to dispose of it. Instead, it should be handed
over to an applicable collection point for the recycling of electrical & electronic equipment. By ensuring this product is
didposed of correctly, you will help prevent potential negative consequences to the environment and human health,
which could otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to
conserve natural resources. For more detailed information about the recycling of the product, please contact your
local city office, waste disposal service of the retail store where you purchased this product.
9.0 ACCESSORIES
CODE DESCRIPTION
Z-PC-DIN
AL1-35 DIN rail support with screw terminals P=35 mm
AL2-17,5 DIN rail support with screw terminals P=17,5 mm
Z-PC-DIN
1-35 DIN 1 slot support for rear connector P=35 mm
2-17,5 DIN 2 slot support for rear connector P=17,5 mm
4-35 DIN 4 slot support for rear connector P=35 mm
8-17,5 DIN 8 slot support for rear connector P=17,5 mm
8.0 SIGNALLING LEDs
LED STATE MEANING
Tx (GREEN)
Blinking The device sends a correct data
packet
Rx (RED)
Blinking The device receives a correct data
packet (at least one of two buses)
DI1, DI2, DI3, DI4 (REDs)
ON / OFF Status of digital input 1, 2, 3, 4
DO1, DO2 (REDs)
ON / OFF Status of relay output 1, 2
PWR (GREEN)
Fixed The module is power on
PWR (GREEN)
Blinking Outputs in fail (there is no Modbus
communication)