Seneca SG-EQ4, Руководство по установке

Страница: 7 / 8

4-wire Load Cells
SETTING
JUMPERS POSITION
Trimmer On J1 / J2 / J3 / J4 in position 1
Trimmer OFF J1 / J2 / J3 / J4 in position 3
6-wire Output JA / JB in position 1
4-wire Output JA / JB in position 3
6-wire Load Cells
SETTING
JUMPERS POSITION
Trimmer OFF
J1 / J2 / J3 / J4 in position 3
6-wire Output JA / JB in position 1
4-wire Output JA / JB in position 3
The internal jumpers Position 1 and 3 are illustrated on the following figure. On the
board the positions are pointed out by the corresponding number at the sides of the
jumpers.
.
.
Jumper 1n
position 1
· 1 ( • lj
•1
3
. .
Jumper 1n
position 3
Disposal of Electrical & Electronic Equipment (Applicable throughout th
European Union and other European countries with separate collectio
programs). This symbol, found on your product or on its packaging
indicates that this product should not be treated as household waste whe
you wish to dispose of it. lnstead, it should be handed over to a
applicable collection point for the recycling of electrical and electroni
equipment. By ensuring this product is disposed of correctly, you will hel
prevent potential negative consequences to the environment and huma
health, which could otherwise be caused by inappropriate disposal of thi
product. The recycling of materials will help to conserve natural resources
For more detailed information about the recycling of this product, pleas
contact your local city office, waste disposal service or the retail stor
where you purchased this product.
CS J S E I NE C A
ENGLISH - 7/7
MI00155-3-EN