5/8
ASSEMBLY REGULATIONS
For optimal reception of the GPS signal given by the satellites, MyBoat should be positioned in an area not
covered by metal structures. If this is not possible or if the satellite reception is no good, an optional external
antenna with 3m cable (code A-GPS) is available. Follow the procedure supplied with the package for the
installation of the external antenna.
SAFETY INFORMATION
The MyBoat control unit has a terminal block inside its
enclosure.
To access the internal terminal block of the device,
unscrew the screw at the centre of the black cover
positioned at the bottom of the enclosure and lift up.
In the side figure, the cover has been removed.
IMPORTANT:
With the relay card, mobile wiring of
cables connected to terminals is not permitted.
To make the cables from the terminals safe, use the
break-out passages in the back of the enclosure.
When the wiring is complete, fasten the protective cover
on the device with the screw to prevent any accidental
contact.
12 3
4 56 7 89 10 11 12
-
+
13
