PT300D QuickStart Guide
Part Number BFA10082
Sendum Wireless Corporation
4500 Beedie Street, Burnaby, BC V5J 5L2
www.sendum.com
-- 5 --
Sensor Pack
AC Adapter
Data Cable
PT300D
Command
Module
PT300D
Command
Module
Sensor Pack with
sufficient battery charge
PT300D
Command
Module
Accessory Pack
10K mAh Battery Pack
with sufficient charge
Figure 1 - Turning the PT300D on by connecting it
with a charged Sensor Pack
Figure 1 - Turning the PT300D on by connecting it
with a Sensor Pack being charged
Figure 1 - Turning the PT300D on by connecting it
with an Accessory Pack and a charged
10K mAH Battery Pack
4. LED Light Indications
LED
Status
Description
Network
Solid Green
Device in carrier coverage
area
Green
(Blinking)
Device is in Aircraft
Transmission Suppression
Mode
Solid Red
Device out of carrier
coverage area
Red
(Blinking)
Device is in Coverage Sleep
Mode
Battery
Solid Green
Sensor Pack charge level
near full (>80% of labeled
capacity)
Red
(Blinking)
Sensor Pack charge level
good (approximately
25-80% of labeled capacity)
Solid Red
Sensor Pack needs
recharging (<25% of
labeled capacity)
Charger
Red
Sensor Pack is charging
Green
Sensor Pack charging is
complete