Sencore MRD 3187B, Руководство пользователя

Страница: 86 / 203

MRD 3187B User Manual
Page 85
MPEG/IP 1-3
Selected I/O: yes
►Receive: Enable
Grp To Recv: 1
MPEG/IP 1-3
Selected I/O: no
Receive: Enable
►Grp To Recv: 1
MPEG/IP 1-3 1
►Ip: 239.192.1.50
Dest Port: 01050
Send IGMP Report
Receive
This option enables or disables the receive function of
the MPEG/IP card.
1.
Use the and buttons to move the cursor
to, “Receive:” then press the
button.
2. Use the and buttons to Enable or
Disable “Receive,” then press the button to
save the selection.
Group to Receive
The MRD 3187B allows the user to subscribe to two multicasts simultaneously in order to
provide a backup in the case of a primary failure. There are three options for “Group To
Recv:” (1, 2, Auto). Auto will attempt to join the first multicast, if it cannot join that one it
will then attempt to join the second one. If the unit is currently joined to the first multicast
and that stream disappears, the unit will automatically switch over to the second receive
group. The only time the unit will go back to the first receive group is if it is forced back or
if the second receive group disappears. If the “Group To Recv” is set to either 1 or 2, the unit
will always stay on that receive group regardless of if it is present or not.
1.
Use the and buttons to move the cursor
to, “Grp To Recv:” then press the
button.
2. Use the and buttons to select the
desired group to receive (1, 2, Auto), then press
the button to save the selection.
Receive 1
1. Use the and buttons to move the cursor
to, “Receive 1,” then press the
button to
access the Edit screen.
IP
1. Use the and buttons to move the
cursor to, “IP:” then press the
button.
2. Use the and buttons to select the
column to edit and use the and
buttons to change the IP, then press the
button to save the selection.
Note: A Unicast or Multicast IP address may be
chosen.
Unicast: X.X.X.X – 223.255.255.255
Multicast: 224.0.0.0 – 239.255.255.255
Suggested Multicast Range: 239.192.X.X