DMG 1200 - User Manual
Page 31 (37)
TIME
↕
>TIME: 2013/2/24 03:27:48
SOURCE: NTP SERVER
ADDRESS: 10.0.1.23
TIME
↕
TIME: 2013/2/24 03:27:48
SOURCE: MANUAL
>SET DATE: 2010/8/12
SET TIME: 03:27:48
Unit Time
The time and date for the unit can be set manually or
synchronized with an NTP server. The date and time
are used for storing the correct time for alarms and
logs for accurate representation of when the
occurrence took place.
Network Settings
The unit network menu provides status for current IP
address. This includes the IP Address, Subnet Mask,
Gateway, DHCP Mode, Hostname, and MAC
Address.
Press
“Enter”
to
get
to
the
NETWORK
CONFIGURATION menu. From here, you can set the
Hostname and DHCP Mode. If DHCP is enabled, the
current IP address is shown. If DHCP is disabled,
press
“Enter” while the cursor is on IP Address,
Subnet Mask, or Gateway to manually change the IP
Address, Subnet Mask, and Gateway.
The hostname allows a user to remotely connect to
the DMG 1200 with a Web Browser by simply typing
the hostname and not the IP address into the web
browser. This is helpful when used on DHCP
networks.
To edit the hostname press the “Enter”
button while cursor is on “Hostname” in the UNIT
NETWORK STATUS
and “Enter” again on Hostname
in the NETWORK CONFIGURATION menu.
UNIT NETWORK STATUS
↕
>IP ADDRESS: 10.0.15.6
SUBNET MASK: 255.255.0.0
GATEWAY: 10.0.1.3
DHCP MODE: ENABLED
HOSTNAME: DMG1
NETWORK CONFIGURATION
↕
>HOSTNAME: DMG1_ _ _ _ _ _
DHCP MODE: DISABLED
IP ADDRESS: 10.0.15.6
SUBNET MASK: 255.255.0.0
GATEWAY: 10.0.1.3
