Quick Start Guide
AG 4800XS
Form 8188
Version 1.0 - Oct 2018
Page 2
2. Power on the chassis and type
or
bar
of the PC’s web browser.
3. When the AG 4800XS
’s webUI is visible, enter the new static IP
address you wish to assign to the unit.
4. Power off the chassis and change the dip switches to off/off to force the
chassis to use the IP address that was assigned in the webUI.
5. Power on the chassis and it should now be reachable using the static IP
address that was assigned. The IP address should also now be shown
on the LCD screen on the front of the unit.
Chassis Configuration
The AG 4800XS chassis can be configured and controlled using the Dashboard
software application, the built-in web interface or SNMP (if licensed).
The primary method of access and configuration for the chassis is done through
the
openGear™ Dashboard software. This software is available for download
Once downloaded, install the software using the on-screen prompts. After
installation
, Dashboard will automatically find all openGear™ chassis’ that are on
the same network as the PC it is running on. From within Dashboard, IP
addresses for the Sencore AtlasGear cards can be assigned.
Some limited AG 4800XS configuration can also be done from the chassis’
webUI. Type the IP address of the unit into the address bar of a web browser to
access it.
Manage Sencore AtlasGear Cards
Various Sencore AtlasGear cards can be used in the AG 4800XS including the
AG 2600, AG 4400 and AG 5800 receiver/decoder cards and the AG-SDI2X IP
gateway card. The chassis also supports other cards compatible with the
openGear™ platform.
The AG 4800XS/AG 4800X chassis includes an internal network switch that
provides management network access to all installed AtlasGear cards. Each
card should be assigned an IP address using the Dashboard application and
then each card will be accessible using its webUI either from within the
Dashboard application or directly from a PCs web browser. Please see the user
manuals for the individual AtlasGear cards for more information about
configuration and operation.
Support
Contact Sencore ProCare for support, if required.
Email:
Phone: +1-605-978-4600
