AG 2600
– User Manual
Page 69 (77)
– Specifications
AG 2600
– Base Unit
Includes
–
Backplane
System
–
Configurations Allows:
Single turnaround card with an input option.
Rear Panel:
Fixed inputs and outputs with one option input. Option
input not field upgradeable.
Remote Operation/Update Interface
–
Type:
Ethernet, 10/100
Rear Panels indicators:
Link, Activity (To
openGear
TM
frame)
Connector:
RJ45 (To
openGear
TM
frame)
Monitor and Control Interfaces
–
Web server GUI:
HTTP via web browsing for control & monitoring
SNMP:
Control & monitoring
Operating Altitudes
0 to 10000 feet
AC Power
–
Operating Voltage:
100-240VAC
PSU Max Power:
350W (Frame)
Current Draw:
Base Unit with ASI and no option cards
–
6-7W
DVB-T2/C2/ISDB-T option card with active input
5W (additional)
Base Unit with ASI and MPEG/IP option card
–
13W
Base Unit with ASI and with MPEG/IP and DVB-S/S2
option card with LNB disabled
–
17-18W
Base Unit with MPEG/IP, DVB-S/S2 with LNB enabled
and DVB-CI Module option with 2 CAM Modules
installed
–
26-27W
Max Power Draw:
26-27W
ASI Input and Output Features
General
–
Connector:
2x BNC, Female
Impedance:
75Ω
Return Loss:
≥15dB, 3.5 to 270 MHz
ASI Serial TS Input / Output
–
Number of ASI Inputs:
1
Number of ASI Outputs:
1 (non loop-through)
Standard:
EN50083-9 (V2:3/98) DVB ASI
Data Bit Rate:
270 Mb/s
Maximum TS Rate:
200 Mb/s
Minimum TS Rate:
250 Kb/s