Sencor SWS 12500, Руководство пользователя

Страница: 10 / 72

EN – 8
ADVANCED WEB INTERFACE SETTINGS
Press the “ADVANCED“ button on the web interface top This is where you can set and
display the device’s calibration data as well as make a firmware update.
Indoor / Outdoor & Ch 1~ 7
moisture calibration
Press to enter the global settings
Select the displayed temperature unit
Indoor / Outdoor & Ch 1~ 7
temperature calibration
Pressure calibration
Current firmware version
Please select the pressure unit
The current offset value is the one
you set before to compensate for the
pressure reading
Rain, wind speed, wind direction,
UV and light
The firmware update is only available
from the PC/MAC web browser
CALIBRATION
1. Users can enter or change the offset and gain values for various measurement
parameters while the current offset and compensation values are displayed next to the
relevant fields.
2. When finished, press the
Apply
button on the SETUP page
The current offset value will show the previous value you entered. If you want to change
that value, just enter a new value in the blank field; the new value will become valid when
the
Apply
icon on the SETUP page is pressed
NOTE:
The calibration of most parameters is not required with the exception of the Relative
Pressure parameter, which must be calibrated with respect to the sea level to consider
the elevation influences.