- 6 -
07/2020
Copyright © 2020, Fast ČR, a.s.
EN
Electric kettle
User's manual
■
Prior to using this appliance, please read the user's manual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’s manual.
Keep this user's manual in a safe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user's manual.
■
Carefully unpack the appliance and take care not to throw away any part of
the packaging before you find all its parts. We recommend saving the original
cardboard box, packaging material, purchase receipt and responsibility statement
of the vendor or warranty card for at least the duration of the legal liability
for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION
A1
Lid
A2
Spout
A3
LED heating plate backlight
A4
Base stand
A5
Open lid button
A5
Handle
A7
Backlit On/Off switch
A8
Central connector
A9
Power cord
A10
Power cord groove
BEFORE FIRST USE
■
Remove all wrapping material from the electric kettle and its base stand.
■
Fill the kettle with clean water up to its maximum water mark (MAX). Boil the water
and empty the contents of the kettle. Repeat this process 2 to 3 times. To boil water,
proceed according to the instructions in chapter Operation.
OPERATION
Attention:
The electric kettle is intended only for heating water. Never heat
any other liquids or substance in it.
■
Set the required power cord length and push it into the groove in the base stand.
Place the base stand on a stable, even and clean surface.
■
Fill the kettle with the required amount of water. You may fill it through the spout
or through the opening after lifting the lid. To open the lid, press button
A5
. The
water level must reach at least the minimum mark (MIN) but must not exceed the
maximum mark (MAX). After filling the kettle, properly close the lid.
Attention:
Never fill the kettle when it is placed on the base stand.
■
Place the kettle on the base stand. Insert the power plug into a power socket and
push down on the switch
A7
to start the kettle. The button backlight and the LED
heating plate backlight will be lit.
Attention:
Never start the kettle empty without water. The incorrect use of
the kettle may negatively affect its working order and lifetime.
■
When the water starts to boil, the kettle will turn off automatically and the LED
backlight will turn off.
Note
:
The kettle can be stopped at any time by setting the switch
A7
up (off).
■
Pour the boiled water into a prepared container, cup or mug. When carrying it, hold
the kettle upright, particularly when it is filled all the way up to the maximum mark.
■
If you wish to fill the kettle again and start heating immediately after pouring in
the water, wait approximately 30–60 seconds. When opening the lid, be especially
careful to avoid scalding yourself with boiling water or steam.
■
After you finish using it, disconnect the power cord from the power socket. Empty
the kettle and allow it to cool down.
PROTECTION AGAINST BOILING WITHOUT WATER
■
If you accidentally turn on the kettle without water, the thermostat will, after
reaching a certain temperature, interrupt the electric circuit. The switch
A7
will
return to the raised "off" position and the LED backlight will turn off. The kettle can
be used again after several minutes, once the heating bottom has cooled down.
Attention:
Even though the kettle is equipped with protection against boiling
without water, do not turn it on when empty. The incorrect use of
the kettle may negatively affect its working order and lifetime.
CLEANING AND MAINTENANCE
Attention:
Prior to any cleaning or maintenance, always disconnect the base
stand from the power socket and allow the kettle to cool down.
Do not wash the kettle, its base stand or power cord under
running water and do not submerge them in water or another
liquid.
■
To clean the external parts of the kettle, use a dry cloth or a cloth dipped in a weak
solution of neutral kitchen detergent. Never use solvents, cleaning products with an
abrasive effect, etc. After washing, wipe the surface with a clean, lightly dampened
cloth and then wipe dry.
■
Wipe the internal parts of the kettle using a soft sponge or clean cloth dipped in
clean warm water. Do not use detergents or any other chemical agents on the
internal parts. After cleaning the kettle, rinse it out several times with clean water.
■
To clean the base stand, use only a dry cloth.
Cleaning the filtration strainer
■
The removable filtration strainer serves to capture limescale, preventing it from
getting into the cup together with the water. Regularly clean the filter under running
water using a fine nylon brush or submerge it for several hours into a vinegar - water
solution (recommended dilution ratio 1:2). After applying the solution, rinse the
filter under clean running water.
Removing limescale deposits
■
During normal use, substances contained in water accumulate on the appliance to
form so-called limescale deposits. These may negatively affect the lifetime of the
kettle and ruin the taste and appearance of your beverage, so it is important to
regularly remove them based on how frequently the kettle is used.
■
When using the kettle at a frequency of 3 to 5 times per day, we recommend to
remove water scale deposits
– once per month in areas with hard and very hard water;
– once every two to three months in areas with soft and medium hard water.
■
Limescale deposits can be cleaned away using standard available limescale removal
products (according to the manufacturer's instructions) or use:
- 8% white vinegar, generally available in stores. Fill the kettle with 1 litre of water and ¼
litre of vinegar. Bring the solution to a boil and leave it to act in the kettle for 2 hours.
Then empty the kettle and before further use, boil clean water in it four to five times.
– citric acid. Boil 1 l of water in the kettle, then add 30 g of citric acid into the boiled
water, and allow the solution to act for about 30 minutes. Then empty the kettle
and before further use, boil clean water in it four to five times.
TECHNICAL SPECIFICATIONS
Rated voltage range ............................................................................................................220−240 V
Rated frequency.......................................................................................................................50–60 Hz
Rated power input ........................................................................................................ 1,850-2,200 W
Volume .................................................................................................................................................. 1.7 l
Changes to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING
THE DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these products to determined collection points. Alternatively, in some
European Union states or other European countries you may return
your products to the local retailer when buying an equivalent new
product.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your retailer or supplier for
the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
