EN-6
EN
Vacuum Cleaner
SVC 52BK / SVC 52GR / SVC 52WH
Copyright © 2019, Fast ČR, a.s.
Revision 08/2019
B
1
2
3
4
5
6
1
Parking position
2
Cover grill of the outflow filter
3
Power cord
4
Combination nozzle
5
Carry handle
6
Front wheel mechanism
ASSEMBLY
Insert the hose into the air suction opening
Press both the safety buttons on the end of the hose end and insert the hose end into the air suction
opening on the vacuum cleaner until you hear a “click”. The hose is now secured in correct position.
Attach the holder to the telescopic tube
Make sure to place the holder with the hose on the wider part of the telescopic tube.
Attach the floor inlet nozzle to the telescopic tube
Make sure the floor nozzle is attached the narrower part of the telescopic tube.
INSTRUCTIONS FOR USE
Connecting your vacuum cleaner to the electrical power grid
Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the
cord is out of the product. Insert the plug into the wall outlet.
Note:
Yellow marking on the supply cable warns that the cable is close to its end. Do not pull
the cable more than to the red marking.
