EN-8
EN
Bagless Vacuum Cleaner
SVC 1030 (Cat & Dog)
2019
09/2019
Ending the vacuuming process
When you finish vacuuming, switch the vacuum cleaner off by pressing the START / STOP button and then
disconnect the power plug from the socket .
To wind the power cord back to the vacuum cleaner, press and hold the winding button with one hand . Hold the
cord with your other hand to protect the vacuum cleaner input area from damage
Tip:
If the winding process stops and part of the power cord is still outside, release the winding button and pull
the cable out again by about 50 cm and press the winding button again and repeat the winding process .
Carrying your vacuum cleaner
It is possible to hold and carry the vacuum cleaner using the fold-out handle (pic . A5) or the handle at the front
of the vacuum cleaner (pic . C1) .
Caution:
Never try to carry your vacuum cleaner by holding the dust container handle!
STORAGE OF VACUUM CLEANER
Before storage you can disassemble your product to the individual parts or you can store it assembled with the
telescopic tube stored in one of the parking positions .
CLEANING AND MAINTENANCE
Caution:
Before cleaning disconnect this product from the power source .
Emptying the dust container
Empty the dust container as soon as the full dust container warning light comes on; otherwise the air flow and
the suction strength will be reduced .
E
1
Safety lock of the bottom
hatch
2
Plastic conical filter
3
Bottom hatch
4
Plastic conical filter
