Sencor SVC 0625AT, Оригинальное руководство

Страница: 8 / 10

- 8 -
12/2019
Copyright © 2019, Fast ČR, a.s.
EN
Cordless Vacuum
Cleaner 4in1
User's manual
■ Prior to using this appliance, please read the user’s manual
thoroughly, even in cases, when one has already familiarised
themselves with previous use of similar types of appliances. Only
use the appliance in the manner described in this user’s manual.
Keep this user’s manual in a safe place where it can be easily
retrieved for future use.
■ We recommend saving the original cardboard box, packaging
material, purchase receipt and responsibility statement of the
vendor or warranty card for at least the duration of the legal
liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in
the original box from the manufacturer.
DESCRIPTION OF THE VACUUM CLEANER AND ITS
ACCESSORIES
A1 Handle of the upright
vacuum cleaner
A2 On/Off button of the
upright vacuum cleaner
A3 Button for setting 2
suction power levels and
2 rotary brush speeds
A4 Connecting cable
located in the joint
between the handle
and body of the upright
vacuum cleaner.
A5
Button for releasing the
hand vacuum cleaner
from the body of the
vacuum cleaner
A6
Body of the vacuum
cleaner
A7
Bagless hand vacuum
cleaner with the Cyclone
system for perfect
separation of dust from
air
A8 Floor nozzle release
button
A9 Floor nozzle with an
electric rotary brush
A10 Air exhaust openings
A11 Dust container
A12 Washable internal
HEPA type filter
A13 Washable external filter
A14 Hand vacuum cleaner
holder
A15 On/Off button of the
hand vacuum cleaner
A16 LED charging level and
battery power indicators
A17 Dust container release
button
A18 Motor unit of the hand
vacuum cleaner
A19 Air exhaust openings
A20
Hand vacuum cleaner
suction opening
A21
Slot nozzle
A22 Brush nozzle
A23
Charging base with
storage space for the slot
nozzle and brush nozzle
A24 Power adapter
A25
Cat&Dog Mini motorised
brush
DESCRIPTION OF THE MOP ATTACHMENT
G1
Mop attachment
G2 Tank for water / solution
with cleaning detergent
G3 Filling outlets
G4
Removable Velcro mop
cover
G5
Surface to attach the
mop cover (at the bottom
of the attachment, not
shown)
G6 Removable panel with
nozzles (at the bottom
of the attachment, not
shown)
ASSEMBLY AND DISASSEMBLY
1. Hand vacuum cleaner
■ Insert the internal filter A12 into the external filter A13 and turn
the handle of the internal filter
A12
clockwise (see fig.
B1
), until
both filters are joined (see fig. B2 ). Insert the assembled filter into
the dust container
A11
, and attach the dust container
A11
to the
motor unit of the hand vacuum cleaner A18 .
■
It is possible to connect the brush nozzle or slot nozzle
A22
or
A21 , which are a part of the accessories, to the suction opening
A20
.
■ To disassemble, proceed in the reverse sequence. To remove
the dust container
A11
, press button
A17
and at the same time
remove the dust container A11 .
2. Upright vacuum cleaner
■
To the body of the upright vacuum cleaner
A6
, connect
the handle A1 so that the connecting cable A4 is inside the
connection. Secure the connection with the supplied screw, see
fig. C . Into the body of the upright vacuum cleaner A6 , insert the
assembled hand vacuum cleaner
A7
(without attachment
A21
or
A22 ). Connect the floor nozzle A9 to the bottom part of the body
of the vacuum cleaner
A6
, see fig.
C
. The connection of the nozzle
A9 is indicated by the button A8 sliding out.
■
To disassemble, proceed in reverse sequence. To remove the floor
nozzle A9 , press the button A8 and at the same time remove the
nozzle
A9
. To take the hand vacuum cleaner
A7
out of the body
of the upright vacuum cleaner A6 , press the button A5 and at the
same time take out the hand vacuum cleaner
A7
.
3. Charging base
■ Assemble the charging base A23 by inserting the top part
into the bottom part (see fig. D ). To ensure better stability, the
charging base A23 can be attached to a wall using the attached
screws, whilst it is necessary to ensure that the charging base
A23 is located within reach of a power socket.
■ To disassemble, proceed in reverse sequence.
PARKING POSITION OF THE VACUUM CLEANER
■
Put the upright vacuum cleaner into the parking position by
placing the tip of your foot on top of the floor nozzle A9 and with
a simple forward movement of the handle
A1
secure the vacuum
cleaner in the vertical position. The latch located at the front on
the elbow of the floor nozzle A9 will slide into the groove on the
top cover of the floor nozzle A9 .
■ To release the upright vacuum cleaner from the parking position,
place the tip of your foot on top of the floor nozzle A9 and tilt the
handle A1 backwards. The latch located at the front on the elbow
of the floor nozzle A9 will slide out of the groove on the top cover
of the floor nozzle A9 .
CHARGING THE VACUUM CLEANER
■
Locate the assembled charging base
A23
on an even, dry and
stable surface within reach of a power socket.
■
Connect the connector of the power adapter
A24
to the socket
located on the side of the charging base A23 , and insert the plug
of the power adapter
A24
into a power socket.
■ Place the upright vacuum cleaner, that you have previously
turned off and put in the parking position, into the base A23 ,
see fig. E . After being inserted into the charging base A23 ,
the vacuum cleaner will switch to charging mode and the LED
indicators A16 will signal the power level of the built-in battery.
A full charge requires approximately 6 hours. The actual charging
time depends on the power level of the battery.
■ Once the charging process is complete, all the LED indicators
A16 will be lit. Disconnect the power adapter A23 from the
power socket.