Sencor STT 212U, Руководство пользователя

Страница: 15 / 114

EN 13
EN
Revision 05/2019 Copyright © 2019, Fast ČR, a. s.
Control
7. Listening to newly recorded track:
– Press
function
(5) to select USB or SD mode.
– Press
skip forward
(19) or
skip back
(18) to select the newly recorded track.
– A newly recorded track is on a USB drive / memory card always saved as
last.
Note:
– Recording speed is 1:1 according to actual playing time of the FM radio
– Recording format is preset to mp3 with a transfer rate: 128 kbps
– The FM stereo frequency is fixed during recording and tuning cannot be
performed.
5.6. Turntable and recording
Note:
– Remove the cover of the stylus.
– Before operation, make sure that the tone arm is disengaged from the support,
and then attach it again.
tone arm insert
needle assembly
1. Press
function
(5) to select the item “phon” on the display.
2. Set
speed selector
(23) in correct position according to the played record.
3. Place the record on the platter; when needed use the 45 rev./min. adapter.
4. By moving the
lifting lever
(21) up, raise the tone arm from the park position and
then move it slowly over the record. The platter starts turning.
5. Push the
lifting lever
(21) toward yourself to let the tone arm down and to gently
touch the record. The record starts now playing.
6. By moving the
lifting lever
(21) up, raise the tone arm up from park position. The
record will continue turning, but the playback stops. If you want to continue to
play, you have to push down the
lifting lever
(21).
7. Adjust the volume to required level.
8. At the end of the record, the platter stops turning automatically. By moving the
lifting lever
(21) up raise the tone arm and move it into park position, then push
down the
lifting lever
(21).
9. If you want to stop the playback manually, lift the tone arm from the record and
return it to the park position.
Sencor STT 212 UM EN CZ SK HU PL.indb 13 06.05.2019 14:14:36