EN-10
EN
Electric Slicer & Grater
SSG 3500WH / SSG 3501GR / SSG 3502BL / SSG 3503OR / SSG 3504RD
SSG 3505VT / SSG 3506YL / SSG 3507TQ / SSG 3508RS
2015
01/2015
CLEANING AND MAINTENANCE
•
Clean out the appliance after every use .
•
Before cleaning it, make sure that the appliance is turned off and disconnected from the power
socket and that the rotating parts have stopped .
•
Remove the used attachment and chamber A
3
with the feed tube A
2
from the motor unit .
•
Wash the accessories (attachment, chamber A
3
with feed tube A
2
, pusher A
1
and the fastening
pin A
4
) with warm water and neutral kitchen detergent . Then rinse under clean running water
and wipe dry .
Attention:
The cutting blades on the slicing and grating attachments A
9
–
qd
are very sharp and so it is
necessary to be especially careful when handling them to prevent injury .
Note
:
Certain types of food, such as carrot, may cause discolouration of plastic parts of the appliance .
If this occurs, dip a paper kitchen towel in a small amount of cooking oil and apply it on to the
discoloured part of the appliance as soon as possible . Then clean this part in the usual manner .
•
To clean the motor unit A
7
, use a cloth dipped in a weak neutral detergent solution . Then wipe
everything with a clean dampened cloth and wipe dry .
•
Never submerge the appliance or its power cord in water or any other liquids . For cleaning, do
not use thinners or solvents or cleaning agents that cause abrasion . Otherwise the surface of the
appliance may be damaged .
STORAGE
If you will not be using the appliance, store it in a dry place out of the reach of children .
