Sencor SRV 9550BK, Перевод оригинального руководства, Страница: 14 / 18

- 14 -
08/2020
Copyright © 2020, Fast ČR, a.s.
EN
Robotic vacuum cleaner
User's manual
■ Prior to using this appliance, please read the user's manual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’s manual.
Keep this user's manual in a safe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user's manual.
■
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Infrared signal sensor
A2 Anti-collision sensors (in the
bumper bar)
A3 Lidar-type laser sensor
A4 Inspection window
Enables one to check the amount of
debris inside the dust container
A5
Button for turning the automatic
cleaning mode on/off and for
turning off automatic cleaning
A6
Return to the charging station
button
A7 Side sensor
A8
Vents (on both sides of the vacuum
cleaner)
A9 Charging contacts
A10 Anti-fall sensor, central
A11
Side rotary brush
A12 Bottom anti-fall sensor, left
A13 Left motorised rubber wheel
A14 Central rotary brush
A15 Dust container / water tank with
dust container
A16 Front swivel wheel
A17 Bottom anti-fall sensor, right
A18
Top battery cover
A19 Right motorised rubber wheel
B1
Power indicator
B2 Charging station
B3
Charging contacts
B4 Cut-out for power adapter cable
B5 Storage compartment
B6
Power adapter plug socket
B7 Bottom cover
B8
Power adapter
B9 Power adapter plug
C1 Dust container with capacity of 480
ml
C2
Filter holder
C3 Fine filter
C4 HEPA filter
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
C5
HEPA filter holder
C6 Latch for releasing the container
from the vacuum cleaner
D1 Water tank with capacity of 260 ml
D2 Rubber cap of the filling hole
D3 Filling hole
D4
HEPA filter
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
D5 Dust container with capacity of
240 ml
D6 Latch for releasing the dust
container
D7 Latch for releasing the water tank
from the vacuum cleaner
E1 Mop holder
E2
Latch for releasing the holder from
the vacuum cleaner
E3 Mop fastening velcro strips
E4
Mop fabric
E5 Mop attachment fastening groove
F1 Remote control
F2 Display
F3
Scheduled cleaning setting button
F4 System time setting button
F5 Forward direction button / increase
time value
F6 Left direction button / switch to
minutes
F7
Right direction button / switch to
hours
F8 Backwards direction button /
decrease time value
F9 Button for turning the automatic
cleaning mode on/off and for
turning off automatic cleaning
F10 Suction power adjustment button
F11 Start the along-the-walls cleaning
mode button
F12 Return to the charging station
button
F13
Battery compartment cover
F14 Battery compartment (2pcs AAA ×
1.5V)
G1
Rotary brush cover
G2 Latches
G3 Brushes
G4
Brush bearings
G5
Central rotary brush compartment
G6 Replacement rubber brush, suitable
for floating floors
H1 Cleaning brush H2 Blade
Serves to cut hair that is wound on
to the central brush
I1
Battery
I2 Connector
I3
Battery compartment
PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM
CLEANER
■ The robotic vacuum cleaner is intended for cleaning various types of hard floors
such as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with a low
pile height. While vacuuming, it effectively combines various routes to optimally
clean the entire floor area.
■ The suction hole effectively removes hair, animal fur, etc. The side rotary brush
brushes dirt out of hard-to-reach places along walls and furniture and out of corners.
The motorised rubber wheels protect sensitive floors against scratching and can
travel over threshold strips up to a height of 1.5 cm and ride on to a 2 cm high carpet.
■ The suspended bumper enables the vacuum cleaner to dampen the approach to an
obstacle and to efficiently clean around it. The infrared sensors in the front bumper
prevent the robotic vacuum cleaner from colliding with obstacles. Safe operation in
rooms with stairs is made possible by the bottom anti-stair-fall sensors.
■ Another advantage of the robotic vacuum cleaner is the mop function, which
enables dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum
cleaner vacuums small bits of dirt and dust from the floor to prevent the mop fabric
from being excessively soiled during the cleaning cycle. When the vacuum cleaner
finishes cleaning, it will automatically shut off the supply of water and thereby limit
it leaking on to the floor.
■ For easy operating status identification, there is a button on the cover fitted with an
indicator light, the colour of which indicates various operating states, see chapter
GUIDE TO LIGHT INDICATORS. Apart from the indicator lights, the vacuum cleaner
also has audio signals and voice messages that accompany certain functions or error
states of the vacuum cleaner.
■ Comfortable control is made possible by a smart device application that enables the
vacuum cleaner to be turned on and off, to be set to the automatic cleaning mode,
to select an operating mode, to send the robotic vacuum cleaner to the charging
station or to set scheduled cleaning.
■
The vacuum cleaner navigates within an area by means of a Lidar-type laser sensor
and a GYRO MAPPING function, which can identify the space geometry of a room in
which it is cleaning, and thereby the vacuum cleaner is able to better clean the floor.
This is a built-in function and cannot be affected in any way.
PREPARING FOR OPERATION
INSTALLING AND USING THE SIDE ROTARY BRUSH
■
The side rotary brush
A11
is intended for smooth floor surfaces and ensures
effective cleaning in corners, along walls and furniture.
■ If the robotic vacuum cleaner is not supplied with the rotary brush already installed,
it is necessary to attach it. Turn the robotic vacuum cleaner upside down and push
the brush with force on to the pin.
Attention:
When turning the vacuum cleaner upside down for maintenance
tasks, ensure that it does not fall out of your hands on to the
floor or that you do not damage its laser sensor
A3
when putting
it down. We recommend placing the vacuum cleaner on to
a suitable soft surface.
■ When using the robotic vacuum cleaner to clean rooms with carpets, remove
the side rotary brush. When removing it, proceed in the reverse sequence to its
installation.
LOCATION OF THE CHARGING STATION
■ The charging station B2 serves to automatically recharge the battery and the
vacuum cleaner must have good access to it.
■ Select a location for the charging station that is hard, horizontal and dry, and that
is within reach of a power socket. Make sure that there are no stairs or obstacles
within a distance of at least 0.5 m on the left and right of the charging station and
within a distance of at least 1.5 m in front of the charging station, that would prevent
the vacuum cleaner from finding the charging station and docking successfully. It is
appropriate to position the rear part of the charging station against a wall or a piece
of furniture.
■ Remove cover B7 from the underside of the charging station. Connect the power
adapter cable plug into the socket
B6
in the body of the charging station and lead
the power cord through the cut-out B4 in the body of the charging station. Based
on the distance of the charging station from the power socket, the unneeded part
of the power cord can be wound up in the power cord compartment. Then put the
bottom cover back on.
■
Place the charging station in the selected location and insert the power cord plug
into a power socket. Place the remainder of the power cord in such a way that it does
not tangle into the cleaning brushes of the vacuum cleaner.
■
In the event that the vacuum cleaner is not used for an extended period of time,
disconnect the charging station from the power socket and store it in a dry, clean
and cool place.
CHARGING THE BATTERY FOR THE FIRST TIME
■
Before using the vacuum cleaner for the first time, it is necessary to fully charge the
battery for at least 5 hours.
■ Check that the charging station is correctly positioned and connected to a power
socket according to chapter LOCATION OF THE CHARGING STATION.
■ Hold down button A5 ( ) for more than 3 seconds. The indicator in buttons A5
( ) and A6 ( ) will start to flash slowly in blue colour and a melody will be
played. When the indicator is lit blue, the vacuum cleaner is ready for operation.