- 11 -
Copyright © 2020, Fast ČR, a.s.
07/2020
CLEANING AND MAINTENANCE
■
Prior to cleaning it, always turn off the vacuum cleaner using the main switch
A4
.
■
For cleaning, never use abrasive cleaning products, solvents, etc.
■
Neglecting cleaning and maintenance may negatively affect the functioning of the
vacuum cleaner and lead to its reduced performance.
DUST CONTAINER AND DUST FILTER
■
Empty out the dust container
A11
after every use and clean it regularly. Open the
lid
A3
and take out the dust container. Open the dust container lid
A14
and tip out
the contents of the container. For hygiene reasons, we recommend doing this away
from living areas.
■
Remove the dust filter
A12
and holder
A13
from the dust container.
■
Wash the dust container under running water and dry it well.
Note:
It is not necessary to wash the dust container after every use.
■
Tap out or clean the dust filter using a soft brush and insert it back into the holder
and the dust container. If the filter is damaged, replace it with a new one.
■
Using a wet wiping cloth, clean out the area for the dust container
A7
and the
exhaust hole
A8
.
■
Return the closed dust container back into the vacuum cleaner and shut the vacuum
cleaner cover.
Attention:
Do not wash the dust container or the dust filter in a dishwasher.
The dust filter must not be washed using water.
Before putting the vacuum cleaner back into operation, check
that the dust filter is in its location. Otherwise the vacuum
cleaner may be damaged.
SUCTION HOLE
■
With repeat use, dust and dirt may accumulate around the suction hole
A22
, which
may manifest itself through decreased suction efficiency. To clean out the suction
hole, first take out the central rotary brush. Remove the dirt and dust from the
suction hole using a soft brush. Regularly clean the suction hole to ensure maximum
suction power.
CENTRAL ROTARY BRUSH
■
Push on the latches
F1
of the central rotary brush cover
F2
and take the cover out
together with the brush.
■
Use a dry wiping cloth to clean out the area in which the rotary brush is housed.
Clean out the suction hole as described in the previous paragraph.
■
Remove any dirt and material (dust, wound on hair, animal fur, etc.) from the rotary
brush.
■
Reinsert the rotary brush and its cover.
ROTARY BRUSHES
■
Remove the rotary brushes
A17
and
A23
by pulling them upwards. Remove any
dust and dirt from the location where the brushes were mounted.
■
Remove all dust and dirt from the brushes. If necessary you may wash the brushes
under running water. If the bristles were deformed while the vacuum cleaner was
running, dip them in warm water to allow them to return to their original shape.
Allow the brushes to dry before reattaching to the vacuum cleaner.
■
After cleaning them, reattach them.
Note:
The rotary brushes become worn out when used. After a certain time it
is necessary to replace the used brushes with new ones. To order new
brushes, please contact your vendor or an authorised service centre.
MOP
■
After every use of the mop function, remove the duster
D4
, wash it by hand in
lukewarm water with the addition of a small amount of gentle washing powder and
allow it to dry naturally. Wipe the water tank
D1
using a lightly dampened cloth
and then wipe it dry.
COMPLETE ROBOTIC VACUUM CLEANER
■
Regularly wipe the surface of the vacuum cleaner using a soft dry wiping cloth.
■
At least once per week or more frequently, clean the front swivel wheel
A24
, the
motorized wheels
A19
and
A26
, the suction hole
A22
, rotary brushes
A17
and
A23
and the bottom sensors
A15
,
A18
and
A25
.
■
First remove any coarser dirt from the front swivel wheel and the motorised wheels.
Then clean them around their entire perimeter using a lightly dampened cloth and
wipe them dry. Do not forget to also clean the area around the wheels.
■
Wipe the sensors on the underside of the vacuum cleaner using a soft dry wiping
cloth or cotton bud.
CHARGING STATION
■
At least once per week, clean the surface of the charging bast
B3
including the
charging contacts
B5
using a soft dry wiping cloth.
STORAGE
■
When not using the vacuum cleaner for an extended period of time, do the
following:
■
Clean the vacuum cleaner as described in chapter CLEANING AND MAINTENANCE.
■
Remove the battery from the vacuum cleaner as described in chapter INSERTING
AND REMOVING THE BATTERY.
■
Disconnect the charging station from the power socket.
■
Store the vacuum cleaner with all its accessories in a dry, clean and cool place.
TECHNICAL SPECIFICATIONS
Robotic vacuum cleaner
Dimensions (diameter × height) .............................................................................. 320 × 80 mm
Weight ................................................................................................................................................2.2 kg
Operating time per single charge ..............................................................................up to 90 min
Dust container capacity ........................................................................................................... 500 ml
Power adapter
Rated voltage range .................................................................................................... 100−240 V AC
Rated frequency........................................................................................................................50/60 Hz
Output ................................................................................................................................. 5 V, 1000 mA
Battery
Type ............................................................................................................................ 2,600 mAh Li-Ion
Charging time ................................................................................................................................... 4-7 h
Input ................................................................................................................................................. 5 V, 1 A
The declared noise emission level is lower than 65 dB(A), which represents a level A of
sound power with respect to a reference sound power of 1 pW.
DISPOSAL OF USED BATTERIES
Prior to handing over the product at a specialised collection facility, it is necessary to
ensure that the battery is removed. Prior to removing the battery, turn off the vacuum
cleaner using the main switch
A4
. Disconnect the battery using the reverse sequence
to that described in chapter INSERTING AND REMOVING THE BATTERY.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance. Correct disposal of this product helps save valuable
natural resources and prevents potential negative effects on the
environment and human health, which could result from improper waste disposal. Ask
your local authorities or collection facility for more details. In accordance with national
regulations penalties may be imposed for the incorrect disposal of this type of waste.
This product meets all the basic requirements of EU directives related to it.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
