Sencor SMR 111, Руководство пользователя

Страница: 5 / 52

EN-3
BEFORE USE
To insert batteries into the devices, fi rst remove the belt attachment: Lift the
attachment clip and press the belt attachment upwards. Open the battery
compartment and insert 3 AAA batteries (not supplied), ensuring that the
poles are correctly aligned. Then close the lid.
USING
1. Turning the device on/off :
To turn the device on or off , hold down the ON/OFF power button for
3 seconds a BEEP sound will be played to confi rm.
2. Adjusting the volume:
To increase the volume, press the Up ▲ button; to reduce the volume,
press the Down ▼ button.
Note:
The volume level is displayed on the screen.
3. Low Battery Indication
The battery is indicated by number of squares present inside the
battery icon on the LCD screen.
Battery Full
Battery empty
When the battery is low, the battery icon will fl ash and a beep will be
heard to indicate that the batteries need to be replaced.
4. Receiving/transmitting communications:
When the display is on, the devices are in “Reception” mode, i.e.
they are ready to accept a call or sound transmitted on the activated
frequency.
When you press the Call/PTT (Call) button, the devices switches to
“Transmit” mode and will send a sound signal to other device.
For a voice transmission, press and hold the Call/PTT (transmit)
button and speak into the microphone. Hold down this button until the
transmission of your message is complete.