Sencor SLE 3219, Руководство пользователя

Страница: 12 / 38

EN
12
Installing cables
Please carefully read the entire user's manual before installation and operation.
1. Take the TV out of the packaging and place it on an even rigid surface.
Note:
Before connecting or disconnecting a TV, computer or other devices it is necessary to check that the
power cord is disconnected. When disconnecting power or signal cables, hold the cable by the end,
never pull on the cable itself.
2. An IEC antenna connector can be connected with the VF television input connector.
3. The AV output connector DVD can be connected with the television's AV output using an AV cable.
4. Connect one end of the VGA cable to the VGA port on the computer and the other end of the
VGA cable to the VGA port on the television and on both ends tighten the screws in the clockwise
direction.
Note:
When connecting the 15-pin VGA connector, do not use excessive force so as not to damage the
individual pins.
5. Connect one end of the HDMI cable to the HDMI device and the other end of the HDMI cable to the
TV.
Note:
When connecting HDMI cables ensure that the correct orientation is maintained and do not use
excessive force so as not to damage the individual pins.
6. Check that all AV cables are correctly inserted into the corresponding ports.
7. To these connectors connect the input or output SCART connector of the external device.
8. Connect the power cord to a power socket with a voltage of 110 – 240 V ~.
Note:
The permitted power voltage range for this TV is 110 – 240 V~ 50/60 Hz. Do not connect the TV to
a power source outside of this range.
When connecting and disconnecting the power cord, hold the plug by the insulated part and do not
touch the metal parts of the plug.
Connecting and setting up