- 4 -
10/2019
Copyright © 2019, Fast ČR, a.s.
■
Use the appliance and its accessories in accordance with the instructions contained in this
user’s manual.
■
Only use the appliance with the original accessories that came with it.
■
Before every use, check the selected accessory for damage. Never use the appliance with
a damaged accessory.
■
Do not place the appliance or its accessories on an electric or gas stove or in its vicinity,
on the edge of a table or on an unstable surface. Only place the appliance on an even, dry
and stable surface.
■
Do not expose the appliance and its accessories to the outdoor environment, extreme
temperatures, direct sunlight, excessive humidity or excessively dusty environments.
■
Do not place the appliance and its accessories near heaters, open fires or other sources
of heat.
■
Make sure that the appliance is correctly assembled before putting it into operation.
■
Do not touch moving rotating parts during operation. Otherwise, this could result in
injury.
■
Be especially careful when handling hot liquids and foods. Hot steam or splashing hot
foods and liquids may cause scalding. For reasons of increased safety, allow hot foods and
liquids to cool down to at least 45 °C before blending.
■
The operating time of the appliance is 1 minute. Before turning it on again, allow it to
cool down for at least 3 to 5 minutes. When using the appliance to blend sticky or harder
foodstuffs, interrupt operation already after 30 seconds.
■
Do not turn on the appliance when it is empty. Incorrect use of the appliance may
negatively affect its lifetime.
■
Check that the motor unit is turned off, disconnected from the power socket and that the
rotating parts have come to a complete stop before disassembling the appliance into its
individual parts.
■
Do not perform any maintenance on the appliance other than cleaning the individual
components as described in chapter Cleaning and maintenance.
■
Never use an appliance that is damaged in any way.
■
Do not use the appliance if it has fallen on the floor, if it was submerged in water, if it is not
functioning correctly or if it is damaged in any other way.
■
When handling the blade assembly of the blender or chopper unit, especially when taking
the blade assembly out of the bowl, when emptying the bowl and cleaning it, take special
care to avoid injury by the blades.
■
Do not use the appliance when it is not functioning properly or showing signs of damage.
