SENCOR SDN 440T
User's Manual
19
y
Select the Send data transfer mode. Press ENTER.
y
Choose the section(s) you wish to send. Use SPACE to check or uncheck a
section.
y
Press ENTER to start the transfer.
9
Start the data transfer first on the receiving device, then on the sending device.
y
To receive data, select the Receive data transfer mode. Press ENTER, and
the transfer will begin.
9
The time span between the data transfer startup on the PC and the device
must not exceed 30 sec.
9
Note that in the Receive data mode, the newly transferred data will replace the
old information saved in the corresponding sections of your device. In case if
empty sections are transferred, all data in the corresponding sections of the
SDN 440T will be erased.
9
Always back up your important data! Neither the manufacturer nor the
dealers assume any responsibility for lost or corrupted data.
9
It is recommended to use an external power supply while using the PC-Link
function.
SETUP
Personalize your SDN 440T and ensure good maintenance of your personal
records by selecting options in the Setup section.
y
Press SHIFT+SETUP to enter the Setup section.
Most of the Setup section options are very easy to adjust. Unless stated otherwise,
enter a subsection and select the desired option with
Ð
,
Ï
. Then press ENTER to
confirm your choice.
Interface language
The default interface language of the SDN 440T is Czech. You can switch interface
language between Czech, English, German, and Slovak.
Advanced search
If the Advanced search mode is turned ON, the headword closest in spelling to the
portion you have entered so far will be displayed under the input line. You can
speed up your dictionary work by choosing to turn the Advanced search mode
OFF. Advanced search is OFF by default.
