Sencor SDC 120, Руководство пользователя

Страница: 5 / 44

EN - 3
SETTING THE ALARMS
1. Press AL 1.2 once, the A1 LED and the hour digits fl ash.
Press or to set the alarm 1 hour. (hold to advance rapidly).
2. Press AL 1.2 again to adjust minutes. Press or to set the
alarm 1 minutes. (hold to advance rapidly).
3. Press AL 1.2 again, LED displays “ OFF ” (alarm off ). To turn on
the alarm, press or to select “ ON ”
4. Press AL 1.2 again, LED displays “ HI ”. To select lower buzzer
sound level, press or to select “ LO ”.
5. Press AL 1.2 again, the A2 LED and the hour digits fl ash.
Press or to set the alarm 2 hour. Repeat step 2) and 4)
to set alarm 2.
6. Press AL1.2 again or if no key is pressed in approx. 10 seconds
to exit alarm setting mode. When the related alarm is turned on,
it will be indicated by the appearance of the
A1 and/or the A2
LED on the right side of the display.
STOP AND RESET THE ALARM TO COME ON THE
NEXT DAY
When alarm 1 or 2 is sounding, the related A1 or A2 LED fl ashes.
Press the AL 1.2 once to stop the alarm and reset it to come
on the following day. After that, A1 or A2 icon stays on the display.
SNOOZE OPERATION (default snooze duration
is 5 minutes)
When alarm is sounding, press once, the alarm will be
silenced and come on again after the set snooze duration.
Note:
If your second alarm activates while the
fi rst alarm is sounding
or it is in the snooze mode, the second alarm overrides the fi rst
alarm (the fi rst alarm is reset to come on the next day).