Sencor Scooter Two Long Range 2021, Руководство пользователя

Страница: 13 / 18

Maintenance and adjustment
EN
Copyright © 2020, Fast ČR, a. s. Revision 08/2020
EN 13
• Do not ride with other person even in case of children.
• Do not step on the mudguards.
• Do not touch the brake components.
• Always hold on the handlebar.
• Do not try to ride up the stairs, down the stairs or jump with your scooter.
9. Maintenance and adjustment
The brake mechanism must be adjusted before the fi rst ride. Contact a specialized
provider (e.g. a bike service) for proper adjustment. Adjustments cannot be made
under warranty or post-warranty service at the manufacturer or distributor.
If the brakes are too tight or too loose, use a 4mm hex key and loosen the brake
screw anticlockwise to adjust the brake cable length. Then tighten the screw fi rmly.
To fi ne tune, adjust the brake cable tension by turning the nut on the mechanical
brake attached to the handlebar.
Sencor Scooter One EN CZ SK PL HU.indb 12 16.08.2020 21:05:25
In the transport mode, there is a screw (4mm Allen) accessible in the handlebar tube
joint to tighten its fastening. Before tightening the hex screw in the handlebar tube
joint, the hex screws in the joint socket must be loosened fi rst as shown by the ar-
rows on the fi gure.