background image

- 7 -

 

10/2019

 Copyright © 2019, Fast ČR, a.s.

EN

Intelligent contact grill

User's manual

 ■

Prior to using this appliance, please read the user's manual thoroughly, even in cases, 

when one has already familiarised themselves with previous use of similar types of 

appliances. Only use the appliance in the manner described in this user’s manual. 

Keep this user's manual in a safe place where it can be easily retrieved for future use. 

 ■

We recommend saving the original cardboard box, packaging material, purchase 

receipt and responsibility statement of the vendor or warranty card for at least the 

duration of the legal liability for unsatisfactory performance or quality. In the event 

of transportation, we recommend that you pack the appliance in the original box 

from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 

Handle

A2 

Top grill plate cover

A3 

Open grill lid button

A4 

Removable top grill plate

A4 

Removable bottom grill plate

A6 

Grill base

A7 

Control knob with confirm selection 

button

A8 

Display

A9 

M button for selecting manual 

mode

A10 

On/Off button

A11 

Bottom grill plate release button

A12 

Top grill plate release button

A13 

Slide-out drip tray

DESCRIPTION OF THE DISPLAY

B1 

Frozen food symbol

B2 

Bacon symbol

B3 

Chicken symbol

B4 

Ham / smoked goods symbol

B5 

Steak symbol

B6 

Fish symbol

B2 

Hamburger symbol

B8 

Manual mode symbol

B9 

Set temperature display

B10 

Cooking progress bar

B11 

Cooking time display

TOP GRILL PLATE OPERATING POSITIONS

 ■

This contact grill can be used with the top grill plate 

A4

 in three different positions, 

i.e. top grill plate tilted down, top grill plate raised in vertical position or tilted out to 

the same level as the bottom grill plate 

A5

 (so-called open grill).

 ■

When the grill is used with the top grill plate 

A4

 set to the vertical position, it is 

necessary to tilt it up fully.

 ■

To tilt open the top grill plate 

A4

 to be flush with the bottom grill plate 

A6

, proceed 

as follows.

 ■

When the top grill plate 

A4

 is tilted down or slightly elevated above the bottom grill 

plate 

A5

, use the index finger on one hand to hold down button 

A3

 and with the 

other hand tilt open the top grill plate 

A4

 using the handle 

A1

 so that the handle 

A1

 

rests on the tabletop or kitchen countertop. This doubles the grilling area.

 ■

After tilting open the top grill plate 

A4

, release button 

A3

. The top grill plate 

A4

 may 

only be set flush with the bottom grill plate 

A5

 when the grill is disconnected from 

the power socket and cooled down.

REMOVING AND ATTACHING THE GRILL PLATES

 ■

Prior to removing or attaching the grill plates, the grill must be turned off, 

disconnected from the power socket and have cooled down. Using the top handle 

A1

, tilt open the top grill plate 

A4

 to the same level as the bottom grill plate 

A5

.

 ■

To remove the top grill plate 

A4

, use the index finger on one hand to hold down 

button 

A12

 and remove the plate 

A4

 using the other hand. After removing the top 

grill plate 

A4

, release button 

A12

. In the same way, remove the bottom grill plate 

A5

. To release the bottom grill grate 

A5

, use button 

A11

.

 ■

To mount the top grill plate 

A4

 into the top cover 

A2

, slide the tabs at the back of 

the cover 

A2

 into the rear edge of the plate 

A4

. Then push the top grill plate 

A4

 

against the cover 

A2

 so that the clip and the contacts of the heating element on the 

underside of the top grill plate 

A4

 slide into place in the cover 

A2

. In the same way, 

mount the bottom grill grate 

A5

 into the base 

A6

.

Attention:

Before mounting the grill plates 

A4

 and 

A5

 to the grill, make sure 

that they are completely dry.

Note:

Grill plates 

A4

 and 

A5

 are fully interchangeable.

BEFORE FIRST USE

 ■

Remove the contact grill from the packaging material and remove all promotional 

materials from it including labels which may be located on the grill plates. Wipe 

the grill plates 

A4

 and 

A5

 using a clean, lightly dampened cloth with the addition 

of a  small amount of neutral kitchen detergent. After applying the detergent, 

thoroughly wipe the grill plates 

A4

 and 

A5

 using a clean, lightly dampened cloth 

and wipe them dry. Remove the slide-out drip tray 

A13

 from the base 

A6

. Wash it in 

warm water using a neutral kitchen detergent and then rinse it under a current of 

clean warm water. Wipe it dry and put it back in its place.

 ■

The grill plates 

A4

 and 

A5

 and the slide-out drip tray 

A13

 can also be washed in 

a dishwasher (in the upper rack).

Attention:

Before mounting the grill plates 

A4

 and 

A5

 back on to the grill, 

make sure that they are completely dry.

 ■

Do not rinse the grill or its power cord under running water or submerge it in water 

or any in other liquid.

USING THE CONTACT GRILL

Automatic cooking mode

 ■

Check that the slide-out drip tray 

A13

 is correctly seated in the base 

A6

 and that 

both the grill plates 

A4

 and 

A5

 are properly installed in place. We recommend 

smearing the grill plates 

A4

 and 

A5

 with a small amount of cooking oil.

 ■

Unwind the full length of the power cord and connect it to a power socket. Press 

button 

A10

 and the display 

A8

 will turn on. Also, all the cooking symbols will be 

shown on the display 

A8

.

 ■

Turn the control knob 

A7

 and select a food category. Each time the control knob 

A7

 is turned, a different symbol will start flashing. To confirm the selection, press 

the middle of the control knob 

A7

. Only the symbol of the selected food category 

will remain lit on the display 

A8

 and the grill will start preheating. The bar under 

"PRE-HEATING" will start flashing on the display 

A8

 and the time and temperature 

will be shown.

 ■

When the grill plates 

A4

 and 

A5

 are sufficiently preheated, the appliance will beep 

and the bar under "PRE-HEATING" will stop flashing on the display 

A8

. Now you 

can place your food on the grill plate. The bar under "START TO COOK" will start 

flashing on the display.

 ■

Place the food on the bottom grill plate 

A5

 and carefully tilt down the top grill plate 

A4

. The grill automatically detects the thickness of the inserted food and based on 

this adjusts the automatic cooking settings. The time will start counting down and 

the bar under "RARE" will start flashing.

 ■

As the food continues to be grilled, the bars under "MEDIUM" and "WELL DONE" will 

gradually start flashing.

 ■

When the food is sufficiently grilled, the bar under "WELL DONE" will stop flashing 

and the appliance will beep. Tilt open the grill using the handle 

A1

 and, using plastic 

utensils suitable for this type of grill, remove the food from the grill plate. The grill 

will automatically stop heating.

 ■

Turn off the grill by pressing button 

A10

, disconnect the power cord plug from the 

power socket and allow the grill to cool down completely before cleaning it.

Note:

Never use metal cooking utensils or knives as this could scratch the 

non-stick surface of the grill plates.

MANUAL MODE

 ■

Check that the slide-out drip tray 

A13

 is correctly seated in the base 

A6

 and that 

both the grill plates 

A4

 and 

A5

 are properly installed in place. We recommend 

smearing the grill plates 

A4

 and 

A5

 with a small amount of cooking oil.

 ■

Unwind the full length of the power cord and connect it to a power socket. Press 

button 

A10

 and the display 

A8

 will turn on. Also, all the cooking symbols will be 

shown on the display 

A8

.

 ■

Press the M button 

A9

 and the symbol 

B8

 will start flashing on the display 

A8

Use the control knob 

A7

 to set a temperature in the range 70 °- 230 °C. Press the 

middle of the control knob 

A7

 and the grill will start preheating. The bar under "PRE-

HEATING" will start flashing on the display 

A8

 and the time and temperature will 

be shown.

 ■

When the grill plates 

A4

 and 

A5

 are sufficiently preheated, the appliance will beep 

and the bar under "PRE-HEATING" will stop flashing on the display 

A8

. Now you can 

place your food on the grill plate. The bar under "START TO COOK" will start flashing 

on the display.

 ■

Place the food on the bottom grill plate 

A5

 and carefully tilt down the top grill plate 

A4

. The grill automatically detects the thickness of the inserted food and based on 

this adjusts the automatic cooking settings. The time will start counting down and 

the bar under "RARE" will start flashing.

 ■

As the food continues to be grilled, the bars under "MEDIUM" and "WELL DONE" will 

gradually start flashing.

 ■

When the food is sufficiently grilled, the bar under "WELL DONE" will stop flashing 

and the appliance will beep. Tilt open the grill using the handle 

A1

 and, using plastic 

utensils suitable for this type of grill, remove the food from the grill plate. The grill 

will automatically stop heating.

 ■

Turn off the grill by pressing button 

A10

, disconnect the power cord plug from the 

power socket and allow the grill to cool down completely before cleaning it.

TIPS FOR GRILLING MEAT AND SMOKED GOODS

 ■

To achieve optimal results, cut the meat into equally thick slices.

 ■

To prevent meat from becoming tough and dried out, it is recommended not to salt 

it prior to grilling it. It is recommended to salt and season the food with spices only 

after it has been cooked.

 ■

Before grilling marinated meat, first wipe off any excess marinade using a kitchen 

towel. Certain types of marinades may have a  large sugar content which may 

subsequently burn on.

 ■

When grilling, do not puncture the meat so that juices do not run out of it, making 

it tough and dry.

 ■

Do not dry out the meat by grilling it for too long.

 ■

Always make sure that chicken meat is thoroughly cooked.

 ■

You do not have to prick pre-cooked hot dogs before grilling them.

Содержание SBG 6231SS









Отзывы: