15
3) Rotate to clockwise until SIDAF80 and the hook
of the Drill Carriage of Drill Head engage with
pulling the eye nut. Make sure that each of the
hook engages and the positioning pin is in the
hole of gear cover.
WARNING
If the positioning pin is not fixed properly, it will be
extremely dangerous that SIDAF80 could come
off.
【３】
Wiring
1) Turn off the switch of the Drill Head.
2) Follow the below figure and wire.
The figure is the Drill Head SPN-203Ui-E.
WARNING
Ensure that the CEE17 Plug on the Drill Head and the SIDAF80 CEE17 Connector are properly connected. If
the connection is incomple, it will be extremely dangerous to get an electric shock.
