SENAO SL-2511MP, Руководство пользователя, Страница: 19 / 33

17
The operation radio frequency channel that wireless client is using in
infrastructure mode. In infrastructure mode, wireless client will always operate
in the same channel as their Access Point.
Throughput (Bytes/sec)
z
Tx: shows the outgoing (sent) data speed.
z
Rx: shows the incoming (received) data speed.
Link Quality
In infrastructure mode, this bar displays the transmission quality between a
WLAN station (Access Point) and Wireless LAN Mini-PCI Card. In
Peer-to-Peer mode (Ad-Hoc), this bar displays the link quality between two
Wireless LAN Mini-PCI Cards.
Signal Strength
This bar displays the signal strength level. The higher bar is, the more powerful
radio signal is received by the Mini-PCI Card.
Disable/Enable Radio
This button is used like a switch that allows users to turn off the wireless radio
by clicking this button and turn it on again.
Rescan
The radio will rescan all available channels by pressing this button. You can
push this button to rescan the channels for better link quality when the link
quality is poor.
3. Configuration
Make configuration changes by specifying the proper configuration parameters
on this configuration tab as shown in Figure 2-3-7 .
Figure 2-3-7
Profile
You can give a name for this field to a setting of configuration parameters, such
as Network Name, Network Type, Transmit Rate, Encryption (WEP Security),
etc. It makes much easier for users to change WLAN configuration settings
who need to switch working places frequently. Suppose that a user has to work
between the two different offices where there are different network settings. In
this case, this user just needs to setup two profiles for the two offices and
simply selects the proper profile when the user switches to the different office.
Network Name
For infrastructure mode, you need to type in the SSID of the access point to
which your computer connects. For Ad-Hoc (peer-to-peer) mode, you need to