-
9 -
point.
Channel:
User can select the channel form the pull-down list.
Wireless network security
Network Authentication:
There are several types of authentication
modes including Open System, Shared Key, WPA-PSK and WPA2-PSK.
Data encryption:
For Open System and Shared Key authentication mode,
the selection of encryption type is WEP. For WPA-PSK, WPA2-PSK,
authentication mode, the encryption type supports both TKIP and AES.
When encryption is set to WEP…
ASCII:
Only valid when using WEP encryption algorithm. When key
length is set to 64 bits user can enter
5 ASCII characters
(case sensitive),
and 128 bits for 13
ASCII characters
(case sensitive).
PASS PHRASE:
Only valid when using WEP encryption algorithm.
When key length is set to 64 bits user can enter
10 Hexadecimal characters
(0~9, a~f) and 128 bits for 26
Hexadecimal characters
(0~9, a~f).
Key index (advanced):
Select 1~4 key index form the pull-down menu,
must match with the connected AP’s key index.
When encryption is set to WPA-PSK/ WPA2-PSK…
Network key:
Enter network key at least 8 to 64 characters.
Confirm network key:
Enter network key again to confirm.
Advanced
Advanced
Beacon Interval
The time between two beacons. (The system default is 100 ms.)
DTIM Period
The delivery traffic indication message (DTIM) is an element included in
some beacon frames. User can specify a value from 1 to 255 beacons.
Preamble Mode
Select from the pull-down menu to change the Preamble type into
Short
or
Long
.
Set Defaults
Click to use the system default value.
Apply
Click to apply the above settings.
Statistics
Tx OK
Shows information of packets successfully sent.
Tx Error
Shows information of packets failed transmit after hitting retry
limit.
Rx OK
Shows information of packets received successfully.
Rx Packet Count
Shows information of packets received successfully.
