Quick Start Guide
11b/g Wireless SOHO Router
Hardware Installation
1. Place the unit in an appropriate place after conducting a site survey.
2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your
PC/Notebook.
3. Plug one end of another Ethernet cable to WAN port of the device and the other end into you
cable/DSL modem (Internet)
4. Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the
power socket on the wall.
IP Address Configuration
The default IP address of the device is
192.168.1.1
In order to log into this device, you must first
configure the TCP/IP settings of your PC/Notebook.
1. In the control panel, double click Network
Connections and then double click on the
connection of your Network Interface Card (NIC).
You will then see the following screen.
2. Select
Internet Protocol (TCP/IP)
and then click
on the
Properties
button. This will allow you to
configure the TCP/IP settings of your
PC/Notebook.
3. Select
Use the following IP Address
radio
button and then enter the IP address
(192.168.1.21) and subnet mask (255.255.255.0). Ensure that the IP address and subnet mask are
on the same subnet as the device.
4. Click on the
OK
button to close this window, and once again to close LAN properties window.
Logging In
1. To configure the device through the web-browser,
enter the IP address of the device
(192.168.1.1)
into
the address bar of the web-browser and press
Enter
.
2. After connecting to the IP address, the web-browser
will display the login page. Specify
admin
for both the
User Name
and
Password
and then click on the
Login
or
OK
button.
3. Once you have logged in, you man configure the
WAN, LAN and Wireless settings. Please refer to the
user’s manual in the CD-ROM to configure these
parameters.
Quick Start Guide v.1.1
11b/g Wireless SOHO Router
2
Please refer to the User’s Manual in the CD-ROM for complete instructions.
