8
Connecting the Microphone
Use an XLR cable (not included) to connect the microphone to your mixing console,
microphone preamp, or recording device� Make sure phantom power is turned on�
Note:
Phantom power must be used with this microphone� Make sure
your recording device has 48 V phantom power�
Warning
Make sure all faders and volume knobs are down� After the microphone is
connected, set the volume to your preferred level for recording�
Before recording, make sure the high-pass filter is set to OFF (
) and the
attenuation pad is not engaged� See previous section for further reference�
If using this microphone for vocals, do not sing or blow directly into the
diaphragm� Use a pop filter (not included) to eliminate vocal plosives and
shield against corrosive moisture that can damage the diaphragm�
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Connecting the Microphone
