14 FM RADIO
14.1 FM Radio On/Off
To turn on the FM radio, press the Phone Button for 1 second until you hear a mid-toned double beep sound. You will then
hear a voice prompt, “
FM on
”. To turn off the FM radio, press the Phone Button for 1 second until you hear a voice prompt,
“
FM off
”. When you power it off, the Tufttalk will remember the last station frequency. When you power it on, the last station
frequency will be playing.
14.2 Preset Stations
You can listen to preset stations while listening to the FM radio. Tap the Phone Button once to go upward to your next saved
preset station.
14.3 Seek and Save
“Seek” is the function that searches for station to station frequencies. To use the “Seek” function, please follow the procedure
below:
1. Rotate while pressing the Jog Dial clockwise or counter-clockwise to search down or up the station dial.
2. If the tuner finds a station while searching frequencies, it stops the seek function.
3. To save the current station, press and hold the Jog Dial for 1 second until you hear a voice prompt, “
Preset (#)
”.
4. Rotate the Jog Dial in order to select which preset number you want for that specific station. You can save up to 10 preset
stations. (You may cancel the preset operation by waiting approximately 10 seconds. You will then hear “
Save preset
cancelled
”. You can also rotate the Jog Dial until you hear “
Cancel
”. Tap the Jog Dial to confirm cancellation. You will then
hear “
Save preset cancelled
”).
5. To save the current station, tap the Jog Dial again. You will then hear a voice prompt, “
Save preset (#)
”.
6. To delete the saved station in the preset number, tap the Phone Button. You will then hear a voice prompt, “
Delete preset
(#)
”.
Note:
1. You can save FM stations to presets before using FM radio. Connect the Tufttalk to your PC and open the Sena Device
Manager. It allows you to save up to 10 FM station frequency presets on the 10S settings menu. You may do the same
operation by using the Sena Smartphone App.
2. You can still answer an incoming phone call and intercom while listening to the FM radio.
14.4 Scan and Save
“Scan” is the function that automatically searches station frequencies, starting from the current frequency and up. To use the
scan function, please follow the procedures below:
1. Double tap the Phone Button. Then the current station frequency moves upward to find other station frequencies.
2. If the tuner finds a station, it stays at the station frequency for 8 seconds, then scanning to the next station frequency.
3. Scan function stops when you double tap the Phone Button again.
4. To save a station while scanning frequencies, tap the Phone Button when at that station. You will hear a voice prompt from
the Tufttalk, “
Save preset (#)
”. The station will be saved as the next preset number.
5. All stations preset during “Scan”, will overwrite previously set stations.
